MG-IP TDM Over IP Gateway Reference Manual
120
Layer 2 support mode ......................: VLAN
VLAN
VLAN enable...................................: Disabled Disabled
MPLS enable ...................................: (Disabled)
(Disabled)
Transport emulation type .................: Unstructred
Unstructred
Session bandwidth (in Kbps) ...........: 1744
1744
gtsm GetTimeSlotMap
Valid only from the \Config\TDM_Over_Packet directory. Get the time slot allocation according to the
port. The top two lines on the right hand side (00---0---1---etc. and 01- --5--0---etc.) are to be read as
columns. The left most position is 00, then 01... all the way to 24. Since this is a T1 configuration, only
24 time slots are available. In E1 format this display has 32 time slots.
Read from left to right the port number and the associated time slots. The “XXX..XX” in the right hand
column refer to the assigned time slots. In this example ports 1 and 2 have all their time slots assigned.
Ports 3 and 4 have no time slot assignments.
This display shows both the running configuration and the modified configuration.
MG-IP-1:\Config\TDM_Over_Packet>
gtsm all
Running configuration
TimeSlot# 00---0----1----1----2---2
01---5----0----5----0---4
Port 1
fXXXXXXXXXXXXXXXXXXXXXXXX
Modified configuration
TimeSlot# 00---0----1----1----2---2
01---5----0----5----0---4
Port 1
fXXXXXXXXXXXXXXXXXXXXXXXX
gsts GetSessionTimeSlots
Valid from both the \Config\TDM_Over_Packet and the scfg directories. This CLI command displays
the assigned port(s) time slot configuration for one session. As above, the “XXX...XXX” indicates the
allocation of a time slot and the “---” indicates no allocation.Get the time slot allocation according to
the session.
MG-IP-1:\Config\TDM_Over_Packet>
gsts coe
Running Configuration of coe session
TimeSlot# 00---0----1----1----2---2
01---5----0----5----0---4
Port 1
fXXXXXXXXXXXXXXXXXXXXXXXX