MG-IP TDM Over IP Gateway Reference Manual
A-86
SetConfigCESPaylength
Description
Configures the TDM over Packet application payload size.
Abbreviation ccpl
Syntax
ccpl
<all/session name or abbreviation><payload_length> [<max_jitter>]
Syntax Description
<all/session-name or abbreviation>
A defined session name or abbreviation
<payload_length>
The number of frames in the CES packet payload.
The application will calculate the number of bytes based on the frame
length and the number of selected timeslots per frame. The number of
frames that can fit in the payload is a function of the line format (E1 or
T1), the header format (CESoP/SAToP or CESoEth), and the number of
selected timeslots. Full T1 frames are smaller than E1 frames, and the
CESoEth header is smaller than the CESoP/SAToP header.
<max_jitter>
A number of msec, from 1 to 200. Estimate of the maximum jitter
(+ or -). For example, a setting of 50 milliseconds results in a range from 0
to 100 msec. This parameter determines the length of the jitter buffer used
to smooth the effects of distortion due to network congestion, timing drift,
or route changes.
Defaults
User Guidelines
Examples
MG-IP-1:\Config\TDM_Over_Packet>
ccpl s01 20
The request was updated successfully in modified running_config.
Use \c\rp to save the modified running_config
Activate the modified sessions by disabling (ssd) then enabling them (sse) or
perform replace and reload (\c\rr)