Oldsmobile 2001 Silhouette Owner'S Manual Download Page 325

Page: 325 / 455

5-22

Removing the Spare Tire and Tools

The equipment you’ll need
is located in the storage
compartment at the rear of
the vehicle, on the
passenger’s side.

To remove the tools, do the following:

1. Remove the side convenience net.

2. Open the jack storage compartment by lifting up the

tab and pulling the cover off.

A. Jack

B. Strap

C. Bracket

D. Wing Nut

E. Jacking Instructions

F. Bag and Tools

G. Tire Bag and Cable

(AWD only)

3. Remove the jack and jacking tools by loosening the

wing nut and bracket.

4. Separate the plastic pouch from the jack and remove

the jacking tools (folding wrench and extension)
from the pouch.

Summary of Contents for 2001 Silhouette







































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Silhouette

Reviews:

Related manuals for 2001 Silhouette

Brands by name

Popular brands

Oldsmobile 2001 Silhouette, Owner'S Manual

Search results

Summary of Contents for 2001 Silhouette

Reviews:

Related manuals for 2001 Silhouette

Brands by name

Popular brands