manualshive.com logo in svg

Oldsmobile 2001 Silhouette, Owner'S Manual

The Oldsmobile 2001 Silhouette Owner's Manual is a comprehensive guide that provides detailed information about the vehicle's features, controls, and maintenance. Easily download and access this invaluable resource for free from manualshive.com, ensuring you have all the necessary information to maximize your driving experience.

Share
Download
background image

6-52

NOTICE:

The wrong wheel can also cause problems with
bearing life, brake cooling, speedometer or
odometer calibration, headlamp aim, bumper
height, vehicle ground clearance and tire or 
tire chain clearance to the body and chassis.

See “Changing a Flat Tire” in the Index for 
more information.

Used Replacement Wheels

CAUTION:

Putting a used wheel on your vehicle is
dangerous. You can’t know how it’s been used or
how far it’s been driven. It could fail suddenly
and cause a crash. If you have to replace a wheel,
use a new GM original equipment wheel.

Tire Chains

NOTICE:

Use tire chains only where legal and only 
when you must. Use only SAE Class “S” type
chains that are the proper size for your tires.
Install them on the front tires and tighten them
as tightly as possible with the ends securely
fastened. Drive slowly and follow the chain
manufacturer’s instructions. If you can hear 
the chains contacting your vehicle, stop and
retighten them. If the contact continues, 
slow down until it stops. Driving too fast or
spinning the wheels with chains on will damage
your vehicle.

Summary of Contents for 2001 Silhouette








































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2001 Silhouette

VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Rugged Ridge 11252.51 Installation Instructions preview
11252.51
Brand: Rugged Ridge Pages: 3
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Curtis 1POLXP1000RP Installation & Owner'S Manual preview
1POLXP1000RP
Brand: Curtis Pages: 6
Volvo XC60 2014 Wiring Diagrams preview
XC60 2014
Brand: Volvo Pages: 362
Belkin F8J034 User Manual preview
F8J034
Brand: Belkin Pages: 30
Mitsubishi FTO Series Handbook preview
FTO Series
Brand: Mitsubishi Pages: 141
Kia quoris Manual preview
quoris
Brand: Kia Pages: 522
Pyle PLCAP50R Manual preview
PLCAP50R
Brand: Pyle Pages: 4

Brands by name

Popular brands

Load more brands