Oldham olct 80, User Manual, Page: 45 / 120

3
– Menus
39
PG SERIE
Purpose
Configure the serial connection and the backlighting of the LCD display.
How to access
See Figure 20.
Tree structure
Menu Description
Ascii Define the data transmission format:
■
Ascii : data are transmitted in 7-bit format; a byte thus contains the
code for 2 characters. Threads are coded in hexadecimal format.
■
Binary : data are transmitted in 8-bit format; a byte thus contains
the code for 1 character.
Slave Sens Define the slave number of the main sensor (value between 1 and
255). The number 0 indicates that all of the slaves are affected;
therefore, it is best to avoid using this value.
Slave ANA1 Define the slave number of the ANA1 sensor (value between 1 and
255).
Slave ANA2 Define the slave number of the ANA2 sensor (value between 1 and
255).
Slave Rel. Define the slave number of each of the 3 alarm relays (value
between 1 and 255).
38400 Baud Define the data transmission speed. The pre-defined speeds are
1200, 2400, 4800, 9600, 19200 and 38400 bauds.
LINE
■
Line : used if the OLCT 80 is connected to the line of an MX 43 .
■
Loop : used if the OLCT 80 is connected to the loop of an MX 62
or an API, for example.
Back ON
■
Yes : the display is always backlit.
■
No : the display illuminates once a button is pressed on the IR 20
remote control.
Sûre ??
■
ENTER : confirm the changes made and return to the PROG
menu.
■
ESC : cancel the changes made and return to the PROG menu.
Communication with an MX 43 central controller: configure
binary mode at 9600 bauds.
Communication with an MX62 central controller: configure
ASCII mode at 38400 bauds.