Oldham olct 80, User Manual

Page: 26 / 120

3
– Menus
20
Setting Menu See page
Alarm #2
– increasing/decreasing
PROG. > PG AL/REL >
AL SENSOR > AL2 incre
/decre 31
Alarms #1 and #2 - ANA1 and ANA2
sensors
Refer to the Alarm #1 and Alarm #2 settings for the main sensor, since the
information is similar.
Alarm relay #1
Relay #1
– internal/external
PROG. > PG AL/REL >
REL 1 > R1 intern/extern 35
Relay #1
– horn-duration
PROG. > PG AL/REL >
REL 1 > D. Maint s 35
Relay #1
– horn-deactivation
PROG. > PG AL/REL >
REL 1 > Maint YES/NO 35
Relay #1
– horn-normal
PROG. > PG AL/REL >
REL 1 > Rel
normal/klaxon 35
Relay #1
– horn-reminder
PROG. > PG AL/REL >
REL 1 > Recalll YES/NO 35
Relay #1
– horn-reminder length
PROG. > PG AL/REL >
REL 1 > Recalll mn 35
Relay #1
– energized or de-energized
during alarm
PROG. > PG AL/REL >
REL 1 > R1 sec pos/sec
neg 35
Alarm relay #2
Procedural similar to alarm relay #1.
Fault relay
Fault relay
– internal/external
PROG. > PG AL/REL >
RELAIS D. > RD
intern/extern 37
Fault relay
– horn-normal
PROG. > PG AL/REL >
RELAIS D > Rel
normal/klaxon 37
Fault relay
– energized or de-energized
during alarm
PROG. > PG AL/REL >
RELAIS D>RD sec
pos/sec neg 37
LCD backlighting
LCD backlighting PG SERIE > Back On/Off 38
RS485
RS485
– all settings
PG SERIE > 38
Wear rate
Sensor wear rate (display) MAINT > User rate% 42
Sensor wear rate (reset to zero) CALIBRA > Chgt. Sens. 47