11
Use of equipment:-
The user must ensure that the lamp supplied meets the safety standard required for the Zoned
area:-
1. This equipment must only be used in a Category M2 zone without undertaking a full risk
assessment for mine rescue use.
2. Check that the operating temperature range is in the range 0
o
C to +40
o
C for Mining.
3. The lamp must not be disassembled in a hazardous area.
4. The lamp must not be charged in a hazardous area.
5. The battery casings are manufactured from polycarbonate and ABS with nitrile rubber
seals. The performance of these materials, with respect to attack by aggressive
substances that may be present in the hazardous area, shall be taken into account before
the equipment is used.
6. Plastic surfaces may cause propagating brush discharges. Propagating brush discharges
are caused by non-conducting fluid flow over a non-conducting plastic surface. The cap
lights shall not be used in areas where a high fluid flow over the plastic surfaces may occur
(for example in the case of a ruptured process pipe or compressed air pipe).
Special Conditions for Safe Use:
There are no special conditions stipulated within the certification.
Denchi Power Ltd.
Denchi House, Thurso Business Park,
Thurso, Caithness, KW147XW
URL: www.oldhamcaplamps.com
Email: [email protected]
Tel.: +44 (0)1847 808000
August 2016
Summary of Contents for DL9
Page 8: ...8...
