OKUtools PS-01, Operating Instructions Manual, Page: 9 / 16

English Destudding Gun PS-01
OKU Tools GmbH, 70374 Stuttgart, Germany
9
EN
7.2 Greasing points
The following points of the gun need to be greased regularly. You will find a mainte-
nance-set including grease and corrosion preventive-oil-spray in the spare parts list in
chapter 9.5.
To grease the gun it must be partially dismounted (see hereto chapter 6 “Faults and
trouble shooting”). At the exchange of wear parts, it is recommended to grease the
gun at the same time.
No. Designation Service to be
done
Operating material
Measured values
Frequency Notes
1 Trigger Lubricate with
oil Lubricating oil
DIN 51501-L-AN 22 quarterly Oil trigger slightly
2 Piston disk
Grooved ring Lubricate with
grease Lubricating grease
DIN 51825-KP2K-20 yearly Grease piston surface
slightly
3 Balls Lubricate with
grease Lubricating grease
DIN 51825-KP2K-20 quarterly Grease balls slightly
7.3 Maintenance
Except for the lubrication at the intervals specified under 7.2 the gun is maintenance-
free.
1
2
3