English
Destudding Gun PS-01
OKU Tools GmbH, 70374 Stuttgart, Germany
4
EN
Assert warranty claims against OKU Tools GmbH immediately after detection of the
defect or fault.
Warranty claims expire in each case where liability claims cannot be made.
2 Safety information
2.1 Personnel responsible for safety
2.1.1 Operator
Operator is called any natural or legal person who is using the gun or on behalf of
whom the gun is used.
The operator and/or his safety officer must ensure that
•
all essential regulations, instructions and laws will be observed,
•
only qualified personnel will be working with the gun,
•
the a.m. personnel will have the operating instructions available at any time,
•
non-qualified personnel will be prohibited from working with the gun.
2.1.2 Qualified personnel
As qualified personnel are to be considered persons who have been
authorized by the safety officer of the plant to perform the necessary activities and
who are able to recognize and avoid potential hazards because of their education,
experience, instructions and their knowledge of the corresponding standards and
rules for the prevention of accidents as well as the operating conditions (see IEC 364,
definition for qualified personnel).
2.2 General safety instructions
These safety instructions do not claim to be exhaustive. In case of any questions
please contact OKU Tools.
At the time of delivery the gun is state of the art and considered reliable.
The gun is a source of danger for persons, for the gun itself and for other material as-
sets of the operator if
•
it is operated by unqualified personnel,
•
it is used inappropriately.
Operate the gun only when it is in perfect condition!
Any upgrade, modification or redesign of the gun is basically prohibited. In this case
please confer with OKU Tools.