English
Destudding Gun PS-01
OKU Tools GmbH, 70374 Stuttgart, Germany
7
EN
Screw provided screw coupling (2) into the handle. Plug compressed air hose in-
to the screw coupling. The gun requires compressed air with approx. 7-8 bar
working pressure. The maximum operating pressure amounts to 10 bar.
5 Operation of the gun
5.1 Elimination of studs
Press the gun with the claws (36) into the tire rubber over a stud. Operate the trigger
(7) and keep it pressed. The claws close and seize the stud. Then the gun is pushed
off the tire with the push-off plate (25) and the stud is pulled out of the tire. Release
the trigger as soon as the stud has been fully pulled out of the tire. The push-off plate
returns, the claws open, the extracted stud is set free and can be disposed of.
Do not hold the gun with the hand in the area of the push-off
plate. There is danger of violent pressure!
When impressing the gun above the stud a certain counter
pressure has to be put by hand to the tire rubber. With some
practice and skill you will soon find out the correct pressure
in order to obtain a steady working result.
Screw coupling (2) for
compressed air connec-
tion