OKM eXp 4000 User Manual Download Page 44

Page: 44 / 73

Control Elements

With the keys



and



you can select the operating mode. To confirm your selection you have to press

the

button.

6.1.2 Rear View

Figure 6.3 shows the rear view of the control unit and its connections.

The connector for the power supply is used to connect the battery. There the external power supply has

to be plugged in.

On the probe connector the different probes as well as the DDV system can be connected.

The connector for the headphones is used to plug in the delivered headphones enabling the user to hear
an audio output.

Via the connector for the USB cable the device can be connected to a computer via the USB cable. This
is necessary to transfer data from the device to a computer.

OKM Ortungstechnik GmbH

www.okmmetaldetectors.com

Illustration 6.3: Control unit, rear view

Connector for
USB cable

Connector for

power supply

Connector for

headphones

Connector for

probe

Display

Summary of Contents for eXp 4000










































































Search results

Summary of Contents for eXp 4000

Reviews:

Related manuals for eXp 4000

Brands by name

Popular brands

OKM eXp 4000, User Manual

Search results

Summary of Contents for eXp 4000

Reviews:

Related manuals for eXp 4000

Brands by name

Popular brands