38
Assembly
Before you can use the device eXp 4000 for a field measurement you should do some preparations.
Please make notes to the following steps.
OKM Ortungstechnik GmbH
Illustration 5.1: Connection of probe
Step 1
Connect the probe which you would like to
use to the control unit. Regardless of which
probe you are using, you will always use the
same plug for each probe.
You can only use one probe at a time for one
measurement.
Illustration 5.2: Connection of Power Pack
Step 2
Now you can connect the Power Pack to the
control unit. After powering on the Power
Pack you can put it in your pocket.
Now you should power on the device by
using the Power On/Off button.
Illustration 5.3: Connection of headphones
Step 3
The headphones are necessary to hear the
acoustic output of the device.
But you are also able to scan the field
without connecting the headphones.
