10
up on the next line.
ii.
STATIC DPC: 60 steps can be set up & cover the front of the
lens, etc. Close the light so that the effects of bad pixels on the
entire screen section disappear. *Adjust the level by set to ON,
and the LEVEL adjustment will show up on the next line.
iii.
SENSE-UP: select the calibration settings are available under
each step.
7.
RS485: communication camera ID can be set to 0-255. *For all the Auto ZF
Cameras the PELCO 'D' 9600bps fixed PROTOCOL is supported.
a.
Selected:
(Fig. 6.6)
i.
CAMERA ID: can be set to
0-255
ii.
ID DISPLAY: the camera ID
of 485 communications.
iii.
BAUDRATE: communication
speed of 485
communication. * For all
the Auto ZF Cameras with
the BAUDRATE 38400 is
fixed, this is because the
camera's internal communication and relationship changes
randomly, RS485 communication is not. To close Auto ZF
Cameras, please do not change the BAUDRATE.
7. ADJUST: Screen Adjustment Function
1.
SHARPNESS: display precision (Sharpness) 0
~ 100 steps to adjust the level.
a.
Selected:
i.
RESOLUTION: ON / OFF at
the same time, the
resolution will augment.
2.
MONITOR: select the type of vide o output
device-optimized video monitoring of the
environment provided.
a.
LCD: gamma level (GAMMA) and blue (BLUE GAIN) and red (RED GAIN)
to 100 steps each can be adjusted.
b.
CRT: Black Level (BLACK) and blue (BLUE GAIN) and red (RED GAIN) to
100 steps each can be adjusted.
3.
LSC: adjust digital Keystone Correction.
a.
OFF: Turn off this function.
b.
ON: digital Keystone Correction function is selected, and an optimized
digital image to automatically adjust the amount of light that is
optimized for video.
4.
NTSC / PAL: select CVBS additional video connection, TV.
Summary of Contents for HD21T-K10
Page 15: ...15...