7
2.
ATW (Auto Tracking White balance):
Solar and other sources automatically adjust
the white balance. Used to set current
lighting environment and the most
appropriate white balance to the light source
in order to obtain the status by pressing the
ENTER button once will temporarily adjust.
*When the environment changes, it will readjust it.
INDOOR: Indoor lighting is used (± 3700° K).
OUTDOOR: Used in outdoor environments (± 5100° K).
4. DAY & NIGHT: Day & Night Mode Setting
1.
D&N AUTO Mode:
(Fig. 4.1)
a.
DELAY: 0 ~ 255Second. Fast
conversion time, you can adjust
slowly.
b.
D-> N (AGC): 0 ~ 100
*AGC value is based on the color
mode (weeks) in the
black-and-white mode (night) to
adjust the time of the conversion.
c.
N-> D (AGC): 0 ~ 100
*AGC value is based on the
black-and-white mode (night) in the
color mode (weeks) to adjust the
time of the conversion.
*Change the reference level in the
daytime and night-night in the week
that changes the thickness of the
reference level adjustable one, if the
value is too small hunting (screen
flicker) do occur, please be careful.
2.
B/W Mode:
(Fig. 4.2)
a.
BURST: OFF or ON.
Color signal to noise generated by
switching to black and white mode
to full function is used
b.
IR SMART: OFF or ON.
IR LED lights up at night or, if the
object is close to the front of the
camera, IR LED to increase visibility
for yourself is to adjust the brightness. LEVEL 15 steps and AREA (area)
can be set.
3.
EXT Mode:
(Fig. 4.3)
External input to the value of the amount of light control sensor day & night
conversion is performed.
*The case of an infrared camera, EXT mode is set by default.
Summary of Contents for HD21T-K10
Page 15: ...15...