Okina USA HD21T-K10, User Manual

Page: 11 / 16

11
8. RESET: Factory Reset Function
FACTORY: The factory, set to default values to
initialize the set of all modes.
TROUBLE SHOOTING
If there are failures, check below for possible solutions. If abnormality persists, please
contact us.
Product Status and Action:

If the camera does not function properly:

Connect the power of the camera, and wait until the boot is complete

The screen flashes the boot is complete, ready to use condition.

Nothing appears on the screen:

Please confirm the power is connected.

Please confirm the video signal line is connected.

The screen is dim:

Clean, wipe the lens with a cloth or brush.

The screen is exposed to too strong light; change the camera angle or the
position.

The screen is dark:
 Please adjust the contrast of your monitor.

Check that the system is properly terminated.

When used with other equipment, 75 Ω / Hi-z terminals, please confirm the exact
match. Align-Brightness levels.

Motion Detection function does not work:
 Check if the motion detection function is enabled.

Check if the motion detection sensitivity is set too low.

WDR function does not work:

Check if the level is set too low.

AE mode is set to Manual. Check if the WDR standing is not working in the AE
manual mode.

Color is not correct:

Check if the camera facing sunlight or fluorescent light.