![background image](http://html2.mh-extra.com/html/okidata/ol810e/ol810e_service-manual_3693744222.webp)
Page: 135
Service Guide OL810e
Chapter F Option: Second Paper Mech.
3.3.1 Pulse Motor (Hopping)
(1) Turn the printer power switch off, pull out the AC cord from the outlet. Remove the printer off High
Capacity Second Paper Feeder.
(2) Take the paper cassette assy 1 out of High Capacity Second Paper Feeder.
(3) Remove six screws 2 and remove the upper plate 3. Remove two screws 5 and remove the hopping
frame assy 6.
(4) Remove the front cover assy 4 off the guide boss on the guide L (2nd) assy 7 by bending the guide L
(2nd) assy 7 in the direction of arrow shown in the magnified view below.
(5) Pull the sheet guide assy 8 in the direction of arrow and also push in the direction of arrow to unlock
the notch, and bring the sheet guide assy 8 in the direction of arrow
Summary of Contents for OL810e
