![background image](http://html2.mh-extra.com/html/okidata/ol810e/ol810e_service-manual_3693744072.webp)
Page: 34
Service Guide OL810e
Chapter 3 Parts Replacement
3.3.12 Stacker Cover Assy
(1) Remove the operator panel assy (see 3.3.4).
(2) Remove the upper cover assy (see 3.3.1).
(3) Remove the face up stacker assy (see 3.3.7).
(4) Release the stacker cover assembly from the reset Lever R 1 by gently prying the cover from the
reset lever. Remove the reset lever R 1 from the machine.
(5) Release the stacker cover assembly from the reset Lever L. Detach the reset spring 2 from the lower
base unit 3, turn the reset lever L 4 in the direction of arrow until it stops, and remove it in the direction
of arrow .
(6) Remove the LED Cable from the connector on the Main Logic Board. Unlock the two posts of the
lower base unit 3, then remove the stacker cover assy 5.
Note: Use care when removing the Stacker Cover Assembly as the cover close damper is not
permanently attached.
Summary of Contents for OL810e
