Page: 111
Service Guide OL810e
Chapter D Diagnostic Tests
1.1 User Maintenance Mode
- To enter the user maintenance mode, turn the power on while keeping the MENU key pressed
down.
- This mode uses the menu for function selection.
- The user maintenance mode provides the following functions:
(1) Hex Dump
- The data received from the host is printed in hexadecimal notation.
- Printing is activated automatically when the received data exceeds one page. If the received data is
less than one page, printing can be activated manually by pressing the FORM FEED key after
selecting the off-line mode by pressing the ON LINE key. Automatic activation of printing even
when the received data is less than one page is possible by selecting the Auto Eject function on
the menu).
- The only way to exit from this mode is by turning the power off.
(2) Menu Reset
- All settings for Menu level-1 are reset to factory default values. The menus for all executable
emulations, including options, are reset to factory default values.
- The operation mode starts automatically upon completion of resetting.
(3) Drum Counter Reset
- This function resets the drum life data when the user replaces the image drum unit.
- The operation mode starts automatically upon completion of resetting.
(4) X-Adjust / Y-Adjust
- This function sets the first character printing position on the first line.
- The operation mode starts automatically upon completion of resetting.
(5) Operator Panel Menu Disable
- This function is for enabling and disabling the operation panel menu functions (Menu 1, Menu 2,
Tray Select, Copies and Paper Size).
Summary of Contents for OL810e
