manualshive.com logo in svg

OKIDATA OKIPAGE 20, Service Manual

Share
Download
OKIDATA OKIPAGE 20 Service Manual Download Page 83

Page: 48

Service Manual - OKIPAGE20

Chapter 3 Parts Replacement

 

(1) Open the stacker cover .

(2) Unlock the lock by lifting the TR gear (1) to remove the TR gear (1) and roller transfer (2). 

Note ! Don't place the removed roller transfer directly on the desk and so on. When placing it, lay a paper 
and the like under it.

(3) Remove right and left, 2 bearings (3) from the frame-main by sliding them inside while pushing them. 
At this time, 2 transfer springs R (4) would be detached simultaneously.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OKIPAGE 20





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands