OKIDATA OKIPAGE 20, Service Manual

Page: 233 / 284

Page: 139
Service Manual - OKIPAGE20
Chapter D Second / Third Paper Feeder
(1) Remove the Roller assy hopping and Roller assy feed. (See section 3.3.1).
(2) Remove the Roller feed (See section 3.3.8).
(3) Unscrew a screw (1) to remove the Bracket joint (2) , Spring joint (3) and Gear joint (4).
(4) Take away the E-ring (5) to remove the Gear hopping (6).
(5) Disengage latchs to remove the Gear hopping (2nd) (7). (At this time, the Bracket planet assy (8) can
be removed simultaneously.)
(6) Take away two E-ring (9) and pull out the Knock pin (10) to remove the Gear Z38 (11).
(7) Remove two ADF bearing (12) , Spring release (13) , Bearing F (14) and Space hopping shaft (15) and
remove the Shaft hopping (16) , Guide roller (17) , Lever release assy (18) and Bracket sub roller (19).
(8) Take away the Gear planet (z28) (20) to remove the Planet plate (21).
(9) Take away the Bracket spring (sub) (22) to remove the Spring sub (23).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)