OKIDATA OKIPAGE 20, Service Manual

Page: 242 / 284

Page: 146
Service Manual - OKIPAGE20
Chapter D Second / Third Paper Feeder
The listing of the statuses and problems displayed in the form of messages on the LCD is provided in
Table 4-1.
Classification LCD Status Message Description Recover Method
Jam error Notifies of occurrence of
jam while the paper is
being fed from the
Second / Third Paper
Feeder - Check the paper in the
Second / Third Paper
Feeder. Carry out the
recovery printing by
opening the cover,
removing jammed paper
and closing the cover,
and then turning the error
display off.
- When the problem
occurs frequently, go
through the
Troubleshooting.
Paper size error Notifies of incorrect size
paper feeding from the
Second / Third Paper
Feeder. - Check the paper in the
Second / Third Paper
Feeder. Also check to
see if there was a
feeding of multiple
sheets. Carry out the
recovery printing by
opening the cover, and
then turning the error
display off.
Tray paper Error
mmmmmmmm:
Paper size in the tray
being selected
Notifies of no paper or
paper cassettes state of
the Second / Third Paper
Feeder. - Load the paper or paper
cassette in the Second /
Third Paper Feeder.
Interface timeout Notifies of occurrence of
interface timeout
between the printer and
the Second / Third Paper
Feeder. - Verify connection of
Board - BBB and
square-shaped
connector. Replace the
square-shaped connector
if necessary.
- Replace Board - BBB.
* : 2 or 3
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)