manualshive.com logo in svg

OKIDATA OKIPAGE 20, Service Manual

Share
Download
OKIDATA OKIPAGE 20 Service Manual Download Page 31

(6) LED head

Image data for each dot line from the control board is received by the shift register and latch register. The 
4992 LEDs are driven to radiate the image data to the image drum.

(7) Fuser

The fuser consists of a heater, a heat roller, a thermistor and a thermostat. An AC voltage from the power 
supply board is applied to the heater under the control of the HEATON signal from the control board. This 
AC voltage heats the heater. The control board supervises the heat roller temperature via the thermistor, 
and regulates the heater roller at a predetermined temperature (185 °C : Normal paper, MEDIA TYPE = 
MEDIUM) by connecting or disconnecting the AC voltage supply to the heater. If the heater roller 
temperature rises abnormally, the thermostat of the heater voltage supply circuit is activated to cut the AC 
voltage supply forcibly.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OKIPAGE 20





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands