![background image](http://html1.mh-extra.com/html/okidata/okipage-16n/okipage-16n_service-manual_729932146.webp)
Troubleshooting
6 - 29
OKIPAGE 16n
Service Manual, P/N 59274401
From on the preceding page
A
.
From on the preceding page
B
.
•
Yes
Replace the fuser unit.
▼
•
Is the printer recovered?
•
No
Replace the Power/sensor board or Control board.
▼
•
YES END.
▼
•
No
Is the heater or thermistor open?
Measure the resistance between the heater contacts (normal resistance: 220 k
Ω
(25
°
C) between pins 1 and 2, 2.3
Ω
(120 V) and 8.5
Ω
(240 V) between pins 3 and
4) (See chapter 7.3.)
•
Yes
Replace the fuser unit.
▼
•
No
Is the AC voltage applied to the CN2 connector on the Power/sensor board? (See
Fig. 4.)
•
No
Is CN2 connector connected to the Power/sensor board?
•
No
Connect the CN2 connector to the Power/sensor board properly.
▼
•
Yes
Is Pin 31 (HEAT ON signal) of the POWER connector of the Main board turned
on? (In heater on state, this pin is set to 0 V).
•
No
Replace the Main board.
▼
•
Yes
Replace the Power/sensor board.
▼
•
YES
Go to
B
.
Summary of Contents for Okipage 16n
