OKIDATA Okipage 16n, Service Manual

Page: 205 / 238

High Capacity Second B - 18 OKIPAGE 16n
Paper Feeder Service Manual, P/N 59274401
4.3 Troubleshooting Method
When a problem occurs, go through the troubleshooting according to the following procedure.
Problem occurs
Carry out detailed
troubleshooting
according to the
Troubleshooting Flow
(see 4.3.2) Troubleshooting
according to the LCD
Status Message List
(see 4.3.1) Problem displayed by
the LCD message
PAPER INPUT JAM
CHECK TRAY 2
PAPER FEED JAM
CHECK TRAY 2
ERROR PAPER SIZE
CHECK TRAY 2
ERROR CONTROLLER
81
Classification LCD Status Message Description Recovery method
Table 4-1
Jam error
Paper size error
Tray paper out
Interface Timeout
Notifies of occurrence of
jam while the paper is being
fed from the High Capacity
Second Paper Feeder
Notifies of incorrect size pa-
per feeding from the High
Capacity Second Paper
Feeder.
Notifies of no paper or pa-
per cassette state of the
High Capacity Second Pa-
per Feeder.
Notifies of occurrence of
interface timeout between
the printer and the High
Capacity Second Paper
Feeder.
• Check the paper in the High Capacity
Second Paper Feeder. Carry out the
recovery printing by opening the
cover, removing jammed paper and
closing the cover, and then turning
the error display off.
• When the problem occurs frequently,
to through the Troubleshooting.
• Check the paper in the High Capacity
Second Paper Feeder. Also check to
see if there was a feeding of multiple
sheets. Carry out the recovery print-
ing by opening the cover, removing
paper and closing the cover, and then
turning the error display off.
• Load the paper or paper cassette in
the High Capacity Second Paper
Feeder.
• Verify connection of AOLT-PCB and
square-shaped connector. Replace
the square-shaped connector if nec-
essary.
• Replace AOLT-PCB.
4.3.1 LCD Status Message List
The listing of the statuses and problems displayed in the form of messages on the LCD is provided
in Table 4-1.
PAPER OUT
mmmmmmmm TRAY 2
mmmmmmmm:
Paper size in the tray
being selected