OKIDATA OF1050, Service Manual

Page: 27 / 449

Document
width Communication
Mode/Paper width Effective reading
width Copy size
ISO A4 (210 mm)
[INT'L/FTZ] G3/A4 8.2" (208 mm) A4
NA letter (216 mm)
[US/CANADA] G3/A4 8.46" (215 mm) Letter
NA legal (216 mm)
[US/CANADA] G3/A4 8.46" (215 mm) Legal
5 Automatic document feeder (ADF) Up to 11.7" (297 mm) in length. Max. 30
documents:
NA Letter or A4 (20-1b) Max. 15 documents:
NA Letter or A4 (13-28lb bond paper)
Documents shall be placed facedown on ADF
stacker. The first sheet will be fed first in the
feeder and will exit facedown in the document
stacker.
6 Document skew Max. 2.6 mm skew over a document of 11.7"
(A4) length.
For a document longer than 11.7" (A4) length,
occurrence of skew exceeding 2.6 mm over any
11.7" (A4) length is 0.5% or less.
7 Document jam detection 1) Transmission will stop and line disconnection
will occur when the end of a document is not
detected within 14" (356 mm) after scanning
begins (except for the long document scanning. TF + 06)
2) A jam will also be declared if the document
does not reach the scanning position within 5.5
seconds (OKIFAX 2350/2450)/10 seconds
(OKIFAX1050) after the start of a document feed.
Note: When a jam is detected during message
transmission from the feeder, the machine will
stop scanning and disconnect the line, but its
receiving capability will remain valid.
8 Manual release
9 Recording paper or sheet For the first or second recording paper cassette:
1) Type: Plain paper cut (Bond paper)
2) Size: ISO A4 8.26" x 11.7" (210 mm x 297
mm)
NA Letter 8.5" x 11" (215.9 mm x 279.4 mm)
NA Legal 8.5" x 14" (215.9 mm x 355.6 mm)
3) Weight: 16 lbs to 24 lbs/base weight