OKIDATA OF1050, Service Manual

Page: 127 / 449

9 User's programs
1. Function program
2. Dial parameters
3. Clock adjustment
4. System data program
5. Password program
Function program
01: MCF (SINGLE-LOC.)
02: MCF (MULTI-LOC.)
03: SENDER ID
04: MONITOR VOLUME
05: REMOTE DIAGNOSIS
06: CLOSED NETWORK
07: TX MODE DEFAULT
08: T/F TIMER PRG.
09: BUZZER VOLUME
10: 1'ST PAPER SIZE
11: 2'ND PAPER SIZE
12: SELECT LANGUAGE
13: SOFT RINGER SET
14: REMOTE RECEIVE (1050/2350 only)
15: RING RESPONSE
16: MEM/FEEDER SW
17: ONE TOUCH PARAM.
Refer to Table 2.9.4 Function Program for Specification
of the function programs No. 01 through 17.
Dial parameters
1. NATIONAL CODE
2. REDIAL TRIES
3. REDIAL INTERVAL
4. DIAL TONE DETECT
5. BUSY TONE DETECT
6. MF (TONE)/DP (PULSE)
7. PULSE DIAL RATE
8. PULSE MAKE RATIO
9. PULSE DIAL TYPE
10. MF(TONE) DURATION
11. PBX LINE
12. FLASH/EARTH/NORMAL
13. AUTO START
14. ACCESS DIGIT
Refer to Table 2.9.5.03 for specification of dial
parameter settings.
Date and time adjustment.
(1) TSI/CSI Registration of TSI/CSI/CIG (numbers, +
and space) in 20 digits. TSI:Transmitting Subscriber
Identification CSI: Called Subscriber Identification CIG:
Calling Subscriber Identification
(2) SENDER ID Registration of sender ID (alphabetic,
numeric and symbolic) in 32 digits.
(3) CALL BACK NO. Registration of telephone number
for cover let-ter (alphabetic, numeric and symbolic) in 20
digits.
To allow the operator (in this case, a person who wishes
to assign a password to mail box) to assign a 4-digit
password code to one of 8 for OKIFAX 1050, 8 for
OKIFAX 2350 and 16 for OKIFAX 2450 mail-box
memory segments in the message memory.