OKIDATA OF1050, Service Manual, Page: 157 / 449

Page: 77
Service Guide OF1050/2350/2450
Chapter 2 Setup Information
Table 2.9.6 Dial Parameters Settings
No. Item Specifications
01 National code Selecting the following parameters:
INT'L, GRB, NOR, SWE, AUS, USA, BEL, HOL, SUI,
AUT, ESP, ITA, GRE, GER, FRE
Note: Must be set to USA for proper machine operation.
02 Redial tries 0 to 10 tries.
03 Redial interval 1 to 6 minutes (one-minute steps)
04 Dial tone detect Selects the dial tone detection.
ON/OFF selectable.
ON: Enable
OFF: Disable
05 Busy tone detect Selects the busy tone detection.
ON/OFF selectable.
ON: Enable
OFF: Disable
06 MF (TONE) or DP
(Pulse) Selects dialing by multi-frequency or dial pulse.
07 Pulse dial rate Selects the dialing pulse rates for the line.
10 pps/16 pps/20 pps selectable.
08 Pulse make ratio Selects pulse dial rate.
33%/39%
09 Pulse dial type Selects pulse dial type.
Normal(N)/10-N/N+1
10 MF (Tone) duration Selects MF (Tone) duration.
75/85/100 ms selectable.
11 PBX line Selects PBX line.
ON/OFF selectable.