![background image](http://html1.mh-extra.com/html/okidata/ml393plus/ml393plus_service-manual_3659277162.webp)
Page: 104
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.3.07 Top of Form
General Information
Top of form is the distance from the top edge of the paper to the first print position on the page.
The red line on the ribbon protector indicates the baseline of the Top of Form.
When the printer advances paper to the next page, it stops at the top of form.
Procedure: Setting Top of Form
1. Load paper into the printer by pressing FORM FEED.
2. Press SELECT until the printer is OFF-LINE. (SELECT will NOT be lit).
3. The red line on the plastic ribbon protector indicates the base of the printing line. Use this red line as a
guide.
4. Press and hold PARK while pressing one of the two switches listed below.
FORM FEED advances the paper. The space used for the Top of Form increases.
LINE FEED retracts the paper. The space used for the Top of Form decreases.
5. Release PARK.
6. Press SELECT and place the printer ON-LINE. (SELECT will be lit).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)