Oki PAGE 18, Service Manual, Page: 375 / 395

Page: 195
Service Guide OKIPAGE 18/18n
Chapter E Multi-Purpose Feeder Maintenance
3.3.6 Roller B
(1) Remove the upper cover (see 3.3.1 (1) to (3)).
(2) Disengage the plate and frame (on both sides).
(3) Remove the separator assy (see 3.3.1 (1) to (3)).
(4) Remove the AOLE-PCB (see 3.3.2).
(5) Remove the motor bracket assy (see 3.3.5).
(6) Remove the gear (1).
(7) Shift the roller B (2) to the right, lift it by holding on its left side, and pull it out to the left side. The bearing (3) also
comes off at the same time, so be careful not to lose it. Further, pay special attention to make sure that you do not
damage the sensor lever (4) while going through this procedure.