manualshive.com logo in svg

Oki PAGE 18, Service Manual, Page: 109 / 395

Share
Download
Oki PAGE 18 Service Manual Download Page 109

Page: 47

Service Guide OKIPAGE 18/18n

Chapter 3 Parts Replacement

3.3.18 LED Head

(1) Remove the stacker assy 

(1)

. [See 3.3.6]

(2) Unplug the PC connector (2) and 2 LED cables 

(3)

 from the LED head 

(4)

.

(3) Open the hooks of the cover stacker 1 in the direction of the arrow and remove the LED head 

(4)

.

(4) Pull out the head spring 

(5)

 from the post.

Note:

 Don't remove two LED cable 

(3)

 from the PC connector (2).

Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner 
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for PAGE 18












































































































































































































































































































































































































Reviews:

No comments