Oki PAGE 18, Service Manual, Page: 150 / 395

(12) Setting of High Capacity Third Paper Feeder paper feed length
l
This function sets the paper feed length of the High capacity Third paper feeder.
(13) Selection of High Capacity Third paper feeder download table
This function selects the download table for the High capacity third paper feeder.
l
(14) Setting of Multi Feeder paper feed length
This function sets the paper feed length of the Multi Feeder.
l
(15) Selection of Multi Feeder download table
This function selects the download table for the Multi Feeder.
l
(16) Setting of duplex feed length
This function sets the paper feed length of the duplex.
l
(17) Fuser count display
Displays on the LCD the total number of printed pages counted at the engine.
l
(18) Fuser count reset
When the fuser unit is replaced, the maintenance person uses this fuser count reset function to reset the fuser
l
lifetime.
After the fuser counter is reset, the engine enters into the operation mode automatically
l
(19) Engine reset
All EEPROM areas used by the engine are reset to the factory default values.
l
The following items are excluded:
l
* Menu level-1
* Menu level-2
* Operator panel menu disable/enable
* Page print disable/enable
Transition to the operation mode occurs upon completion of resetting.
l
Note:
Do not change the default value of (1)~ (5), (8)~ (16) they are the parameter for adjusting in the factory.
Engine maintenance mode menu system
l l