Oki PAGE 18, Service Manual, Page: 138 / 395

Page: 61
Service Guide OKIPAGE 18/18n
Chapter 4 Adjustment
4.1 Maintenance Modes and Functions
User maintenance mode
l l
To enter the user maintenance mode, turn on the POWER switch while pressing the MENU key.
[Function]
There are 13 functions as follows.
Menu reset
l
Y adjust
l
Hex dump
l
Duplex Adjust
l
Drum counter reset
l
Select paper source command parameter
l
Resource Save (Second, Third, Front Tray)
l
Receive Buffer Size
l
Page placement
l
Operator panel menu disable
l
Setting
l
X adjust
l
Cleaning cycle
l
System maintenance mode
l l
Note:
This mode is used only by service personnel and should not be released to the end-user. To enter the system
maintenance mode, turn on the POWER switch while pressing the RECOVER key.
[Function]
There are 8 functions as follows.
Page count display
l
Page count printing enable/disable
l
Rolling ASCII continuos printing
l
RS232C LOOP TEST
l
EEPROM reset
l
HSP ERROR recovery
l
HSP ERROR count display
l
HSP ERROR count reset
l
SIDM enable/disable
l
Engine maintenance mode
l
Note:
This mode is used only by service personnel and should not be released to the end-user.
To enter the engine maintenance mode, turn on the POWER switch while pressing the
FORM FEED key and ENTER key.
[Function]
There are 19 functions as follows.