Oki PACEMARK 4410, Service Manual

Page: 213 / 215

156
2. Maintenance mode 1
(1) DIP Switch Settings
(2) Power ON Switch Function
DIP Switch
(O: ON, X: OFF, –: ignored)
Function
3 4 1 2
Maintence function enabled mode – – –
Switch
Function
(Valid when DIP switch-1 is ON)
SHIFT ON-
LINE
PATH/
TOF
CON-
FIG
LF FF/
LOAD
PARK TEAR
Starts learning function for slice level of
paper width sensor.
Starts auto-gap test.
Gap open/close test.
Starts gap close.
Starts ON/OFF test for all sensors.
Starts the alignment of print start position
sensor.
Resets the counter of print character
number
Starts AG correction mode.
Starts AG adjustment aid mode.
Flash Loading Mode
Starts aging mode (10 min.)
Starts aging mode (5 min.)
The above switches are also valid during Limited Operation.
The empty boxes indicate not-pressed switches.
: indicates that the switch is pressed.