Oki OKIPOS X400, Manual

Page: 92 / 137

2. This command must be sent as an independent data stream immediately
following the <ESC>A Start code and immediately preceding the <ESC>Z
Stop code. No other commands can be included in the data stream.
3. If more or less than nine commas are included in the command, the entire
command sequence will be ignored. The command must contain exactly nine
commas.
4. If two characters are specified for a parameter, it will be interpreted as a hex
value. For example:
Command Parameter Resulting Command Code
2B +
+ +
5. The current protocol command codes may be verified by printing a self test
label (<ESC>CT)
90