Base Reference Point
Command Structure
<ESC>A3H-aaaaVbbbb
-
=
This
character
is
optional. When present, it specifies that the
horizontal offset is the negative direction. If it is left out the
offset direction is positive.
aaaa =
Horizontal Print Offset (-832 to 0832)
bbbb =
Vertical Print Offset (1 to 9999)
Example:
<ESC>A3H100V50
Placement:
Preceding
all
images
that are based on the new base reference
point.
Default:
Current V and H offset settings in the printer configuration.
Command Function
To establish a new reference point for the current label. The base reference
point is the top left corner or “origin” from where all print position commands
are based.
This command may be very helpful when using labels less than four inch wide
to place images on the printable label surface. It may also be used to move
images
past
preprinted
fields
on
a
label.
Input to Printer
<ESC>A<ESC>L0101
<ESC>H25<ESC>V25<ESC>WB0NORMAL REFERENCE POINT
<ESC>A3H300V75
<ESC>H25<ESC>V50<ESC>WB0NEW REFERENCE POINT
<ESC>Q1<ESC>Z
Printer Output
20
Summary of Contents for OKIPOS X400
Page 16: ...Printer Output 14...