41356801TH Rev.1
73 /
4.
ADJUSTMENT
This chapter provides explanations concerning the adjustment necessary when replacing a part. The
adjustment is made by changing the parameter value set in EEPROM on the main control board. The
parameter can be set by the key operation from the operator panel. This printer has three kinds of
maintenance modes, and it is necessary to select one of the modes when replacing any parts.
4.1
Maintenance Modes and Functions
4.1.1
User Maintenance Mode
To enter into the user maintenance mode, turn the POWER switch on while holding the MENU key down.
Function
There are fourteen functions as follows:
•
Menu reset(See Table4-1)
•
Opepane menu disable
•
Hex dump
•
X-adjust
•
Drum counter reset
•
Y-adjust
•
Resourse Save
•
2nd Tray
•
Recieve buffer
•
Place page Command
•
ECP disable
•
Setting
•
Jam Recovery (Print Performance for continuous)
•
Power Save disable
Detailed descriptions of these functions are provided in Appendix E, DIAGNOSTICS TEST.
4.1.2
System Maintenance Mode
Note:
This mode is used only by maintenance personnel and it should not be released to the end-
users.
To enter into the system maintenance mode, turn the POWER switch on while holding the
Recover key
down.
Function
There are seven functions as follows:
•
Page count display
•
Loop test
•
Page count printing enable/disable
•
EEPROM reset
•
Rolling ASCII continues printing
•
SIDM enable/ disable
•
DRAM Memory Check mode
Detailed descriptions of these functions are provided in Appendix E, DIAGNOSTICS TEST.
Summary of Contents for OKIPAGE 14
