41356801TH Rev.1
110 /
8
White vertical belts or streaks
• Are the LED lens dirty?
• Yes
Clean the LED lens.
• No
Is the contact plate of the transfer roller in proper contact with the power supply/sensor board
(see Figure 6-5)?
• No
Adjust the contact plate to make a proper contact with the power supply/sensor board.
• Yes
Replace the transfer roller.
• Has the problem been solved?
• Yes
End
• No
Is the tension between the back-up roller (7.52kg) and the surface of back-up roller normal?
•No
Replace the back-up roller or bias spring.
• Yes
Is the LED head being installed properly (check HEAD1 and HEAD2 connectors on the main
control board and PC connector on the LED head)?
• No
Install the LED head properly.
• Yes
Replace the LED head.
• Has the problem been solved?
• Yes
End
• Yes
Replace the image drum cartridge.
• Has the problem been solved?
• Yes
End
Note:
After replacing the image drum cartridge, set the printer to the user mainte-
nance mode by turning the power on while pressing the MENU key. Reset the
drum counter (see Printer Handobook).
• No
Replace the main control board or power supply/sensor board.
Summary of Contents for OKIPAGE 14
