Oki OKIOFFICE 87, User Manual

Page: 49 / 124

Dial Directories 37
8 Enter the Location ID. This is a descriptive title up to 15 characters
long. Refer to the instructions below.
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces SPACE One-Touch key
Enter hyphens HYPHEN key
Enter alphabet characters Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears.
Enter a unique character. Press the 0/UNIQUE key repeatedly until the character
you want appears.
The following characters are available: ! @ \ “ _ % ~ # &
‘ ( ) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
Note: Some unique characters can be entered using
one-touch keys.
Enter two letters Press
NO
to move to the next character.
using the same key.
Move the cursor to
YES
and
NO
make corrections.
9 The display shows G3 COMMUN. SPEED [33.6K]. Press
NO
to adjust the speed and
YES
to select it.
10 The display shows G3 ECHO Protection [ON]. Press
NO
to
change the setting and
YES
to select it.
11 Press the START key to finish programming the One-Touch key.
The display shows AUTO DIAL NO. [ ].
12 To continue programming Auto Dial numbers, go back to Step 4. If
you are finished programming, press the SELECT FUNCTION key.
Note: When programming a telephone number, the ID and
communication parameters are unnecessary.