Oki OKIOFFICE 84, Service Manual

Page: 21 / 481

Page: 12
Service Guide OKIOFFICE 84
Chapter 1 General Information
Table 1.5.1 (2/9) Basic Performance Specifications
No. Item Specifications
4
Effective reading width
Document width Communication
Mode/Paper width Effective reading width Copy size
ISO A4 (210 mm)
[INTL/FTZ] G3/A4 208 mm for TX
203.2 mm for local copy
(208 mm for local copy with
Horizontal Reduction = ON) A4
NA letter (216 mm)
[US/CANADA] G3/A4 215 mm for TX
203.2 mm for local copy
(214 mm for local copy with
Horizontal Reduction = ON) Letter
NA legal (216 mm)
[US/CANADA] G3/A4 215 mm for TX
203.2 mm for local copy
214 mm for local copy with
Horizontal Reduction = ON) Legal
Note: Local copy: Printable reading width in local copy mode
No. Item Specifications
5
Automatic document feeder
(ADF) Max. 20 documents for OKIOFFICE 84: NA Letter or A4 (20-lb./75
gm)
Max. 15 documents: NA or A4 (16-28 lb.-60-105 gm bond paper)
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit facdown in
the document stacker.
6
Document skew Max. 2.6 mm skew over a document of A4 length.
For a document longer than A4 length, occurrence of skew exceeding
2.6 mm over any A4 length is 0.5% or less. (Except 13 lb.)
7
Document jam detection 1) Transmission will stop and line disconnection will occur when the
end of a document is not detected within 356 mm after scanning
begins (except for the long document scanning. TF + 10)
2) A jam will also be declared if the document does not reach the
scanning position within 10 seconds after the start of a document
feed.
Note: When a jam is detected during message transmission from the
feeder, the machine will stop scanning and disconnect the line, but its
receiving capability will remain valid.
8
Document jam removal Manual release
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)