Oki OKIOFFICE 84, Service Manual, Page: 33 / 481

Page: 21
Service Guide OKIOFFICE 84
Chapter 1 General Information
1.6.1 Reports & List Specifications (1/2)
Note:
F +OT: Press FUNCTION and One-touch key
FP:
Function program setting
TF:
Technical function setting
No. Item Specifications
1
Call-back message The transmitter sends a call-back message to the receiver only
when the receiver does not respond to voice request of the
transmitter.
2
Sender ID The fax can transmit a programmed alphanumeric message,
such as company's name, consisting of up to 32 characters.
* (Outside only)
3
Transmitting subscriber
identification (TSI) printing Received TSI can be printed at the top of the received page.
* TF + 05 (To enable or disable this function)
4
Cancel report (Power outage
report) The fax will automatically print out a power outage report when
the AC power is restored after the power failure.
5
Activity report The fax can print out an activity report manually, and provides a
record of your fax machine's last 30 communications. This report
does not contain the results of messages which were received
without errors. However it does contain messages received in
memory with or without errors.
* REPORT P1(Manual printout)
6
Message confirmation report The fax can print out a message confirmation report manually or
automatically in the following cases.
(1) Manual print
By pressing the COPY key after a communication
(2) Automatic printout
When the FP+01 (to enable or disable automatic printing after a
communication) is set to Enable.
7
Broadcast entry report The fax can print out a broadcast entry report if specified during
operating sequence of a broadcast.
8
Broadcast confirmation report The fax can print out a broadcast confirmation report manually or
automatically.
* COPY key (Manual printout): Pressed after a broadcast.
* REPORT PR 2 (Manual printout)
* FP +02 (To enable or disable automatic printing)
9
Confidential reception report The fax can print out this report automatically on completion of a
confidential reception.
10
Memory files report Printing the list of received but not printed yet documents and
waiting documents for transmission stored in the memory.
* REPORT PR 3 (Manual printout)
11
Telephone directory This directory is printed manually.
(REPORT PR 4)
12
Configuration report This report is printed manually.
(REPORT PR 5)
13
Protocol dump report This report is printed manually.
(REPORT PR 6)