manualshive.com logo in svg

Oki OKIOFFICE 84, Service Manual, Page: 125 / 481

Share
Download
Oki OKIOFFICE 84 Service Manual Download Page 125

Page: 68

Service Guide OKIOFFICE 84

Chapter 2 Installation

User's Function Table 2.9.4 (3/5)

No. Item

Specifications

12

Broadcast
(Memory transmission)

Max. 90 remote locations can be specified by the following 
means:

One-touch keys (with of without a group list).

l

Two-digit auto dial codes.

l

10 keypad dial number (Max.)

l

One delayed time of calling for this feature can be specified 
unless any other delayed calling feature has been specified.

The combination of 1 delayed broadcast and one immediate 
calling of broadcast is possible.

However, the setting of delayed transmission and delayed 
broadcast must not exceed the total number of specified time 
which is different according to the machine.

When multiple locations are specified for one broadcast

(1) The fax prints a broadcast entry report, if specified in 
operating sequence.

(2) The fax can print a broadcast confirmation report. (FP + 02 
To enable or disable this printout)

13

Delayed transmission from the 
memory

The fax can automatically transmit documents at five specified 
times from the memory.

14

Polling transmission (To be polled)

Document(s) placed on the feeder can be collected by a remote 
station.

15

Polling reception

The fax can collect documents from one remote station.

16

Bulletin polling

A kind of polling transmission. Bulletin polling enables polling 
transmission many times until deleting the documents stored in 
the memory.

17

Transmission preparation (Hopper)

An operator can prepare documents for transmission even while 
the fax is engaged in message reception. They will be 
automatically transmitted upon completion of the reception.

An operator can also prepare documents for transmission  
during transmission from memory.

Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner 
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OKIOFFICE 84


































































































































































































































































































































































































































































































Reviews:

No comments