Oki OKIOFFICE 84, Service Manual, Page: 13 / 481

Page: 5
Service Guide OKIOFFICE 84
Chapter 1 General Information
1.2 General User's Function
1
Transmit mode
Automatic transmit mode
l
Manual transmit mode
l
2
Receive mode
Automatic receive mode
l
Manual receive mode
l
TEL/FAX automatic switchover mode
l
TAD mode
l
Memory only receive mode
l
PC receive mode (This function is the standard for OKIOFFICE of ODA)
l
3
Dual Access
4
Advanced T.30 protocol
5
Dual access
6
Voice request
7
Automatic redial
8
Last number redial (Manual redial)
9
Local copy including multiple copies
Maximum 50 copies of document
l
10
Sender identification (Sender ID)
11
Personal identification (Personal ID)
12
Polling transmission
Feeder Polling transmission
l
Memory Polling transmission
l
13
Polling reception
14
Bulletin polling
15
Acoustic line monitor
16
Automatic alternate selecting call (FAX No. + FAX No. can be registered in one-touch keys).
17
Delayed transmission (Maximum length of delay 3 days)
Delayed broadcast
l
Delayed transmission
l
15 specified time
18
Relay broadcast initiate
19
Confidential message transmission
20
Confidential message reception
8 mail boxes
21
PHOTO mode (at FINE resolution)
64 scale gradations
l
22
G3 sequential broadcast (Memory)
Broadcast mode
l
90 stations at maximum
Delayed broadcast mode
l
23
No paper/no toner reception
24
Memory-only reception
(Memory reception even if paper does not run out)
25
Distinguishing text from picture
26
Page re-transmission (Only in case of memory TX mode)
27
Reduction printing (Reduction rate is from 100% to 75%.) (Legal to Letter)
28
Horizontal reduction (RX, copy: Reduction rate is from 93% to 98%)
29
Smoothing printing (In case of 8 dots/mm x 3.85, 7.7 or 1.54 lines/mm ---> 300 dots/inch x 784 line/inch)
* Turns off in the PC print mode.
30
Programmed key operation ("F" key + "OT" key)
31
Auto dialing