Oki OF5600 Service Manual Download Page 154

Page: 154 / 448

Installation

2 - 86

OKIFAX 5300/5600 Serv Man, P/N 59278301

2.10

Installation of Optional Units

(1)

Items

•

Memory board

•

PC interface board

•

Telephone handset

•

Second paper cassette unit

(2)

Procedure

•

Turn the facsimile power switch OFF and remove the AC power cord.

Note:

Unplug the AC power cord from the wall outlet first and then from the facsimile.

•

Do not remove unnecessary parts.

•

Since screws and small parts are likely to be lost, they should temporarily be
attached to their original positions.

Summary of Contents for OF5600

































































































































































































































































































































































































































































Search results

Summary of Contents for OF5600

Reviews:

Related manuals for OF5600

Brands by name

Popular brands

Oki OF5600, Service Manual

Search results

Summary of Contents for OF5600

Reviews:

Related manuals for OF5600

Brands by name

Popular brands