Oki OF5600, Service Manual

Page: 117 / 448

Installation 2 - 49 OKIFAX 5300/5600
Service Manual, P/N 59278301
No. Item Specifications
Note :
S-ON: Effective if the service bit has been set on.
FP: Function program setting
TF: Technical function setting
12 Broadcast (Memory trans-
mission)
13 Delayed transmission from
the memory
14 Polling transmission (To be
polled)
15 Polling reception
16 Transmission preparation
(Hopper)
Maximum 84 (OKIFAX 5300) and
Maximum 134 (OKIFAX 5600) remote locations can be
specified by the following means:
• One-touch keys (with of without a group list).
• Two-digit auto dial codes.
• 5 keypad dial number
One delayed time of calling for this feature can be specified
unless any other delayed calling feature has been speci-
fied.
5 delayed broadcasts for OKIFAX 5300,
20 delayed broadcasts for OKIFAX 5600,
and one immediate calling of broadcast is possible.
For example, using an OKIFAX 5300 (5 specified times):
2 specified time of delayed broadcast and
3 specified time of delayed transmission.
When multiple locations are specified for one broadcast
(1) The unit prints a broadcast entry report, if specified in
operating sequence.
(2) The unit can print a broadcast confirmation report. (FP
+ 02 to enable or disable this printout)
The fax can automatically transmit documents at five speci-
fied times from the memory. Can be programmed up to
three days in advance.
Document(s) placed on the feeder can be collected by a
remote station.
The fax can collect documents from one remote station.
An operator can prepare documents for transmission even
while the fax is enagaged in message reception. They will
be automatically transmitted upon completion of the recep-
tion.
An operator can also prepare documents for transmission
during transmission from memory.