Oki OF5600, Service Manual

Page: 430 / 448

RMCS System G - 6 OKIFAX 5300/5600
Service Manual, P/N 59278301
2) Enter the directory name with up to eight alphanumeric characters.
3) Register a password of up to 15 alphanumeric characters excluding [\],[“]. If the system opera-
tor is not defined, password registration not required.
4) When you use RMCS Model 10, set the dip switches on the RMCS card. Normally, you need
only press [Enter]. When an other extension slot and conflicting address space are being used,
change the address space with the dip switches, then set the contents by using 1 and 0.
When you use RMCS Model 20, you need only press [Enter].
OFF corresponds to 1 and ON to 0. Therefore set the dip switches to 11000000 in the following
case.
<< RMCS SETTING >>
Remote Management Center System
Press the Esc key to cancel.
HARD DISK DRIVE = [C]
DIRECTORY = [C:\RMCS ]
PASSWORD = [_ ]
<< RMCS SETTING >>
Remote Management Center System
Press the Esc key to cancel.
HARD DISK DRIVE = [C]
DIRECTORY = [C: \ RMCS ]
PASSWORD = [ ]
DIPSW (ON:0 OFF:1) = [11000000]
(For RMCS Model 10 only)