Chapter 1: Assembling and setting up
1-9
Fitting the inter-
ference filter
(cable sleeve)
Connecting the printer to the computer
It is important to read the safety instructions on the first pages of
this manual. Before you can use the printer, you have to connect it
to your computer and to the power supply.
Your printer is supplied with a parallel Centronics interface as
standard. A serial interface can be installed as an additional facility.
This is described in Chapter 7; data on interfacing can be found in
Appendix D.
Some printer models have an interference filter supplied with
them. This square cable sleeve suppresses undesirable electro-
magnetic interference from other electrical sources by means of its
ferrite core.
1.
Open the cable sleeve of the
filter and fit it on the inter-
face cable close to the con-
nector at the printer end.
2.
Snap the sleeve shut to close
it; the cable now has interfer-
ence suppression.
☞
Note!
The parallel and serial interface cables must not be installed or
used at the same time as this may cause malfunctions.
Summary of Contents for ML3390
