Oki ML3390, User Manual

Page: 138 / 349

Chapter 10: IBM - Standard Functions
10-18
Paper feed
Function Dec. Hex. ASCII
Line feed 10 0A LF
Reverse line feed 27 93 1B 5D ESC ]
Variable line feed 27 74 n 1B 4A n ESC J n
(n/216 inch) n = 0 to 255
Variable line feed 27 74 n 1B 4A n ESC J n
(n/180 inch, AGM) n = 0 to 255
Variable line feed 27 37 52 n 1B 25 34 n ESC % 4 n
(n/360 inch) n = 0 to 255
Set line spacing units 27 91 92 4 1B 5B 5C 04 ESC [ \ EOT
0 m
1
m
2
00 m
1
m
2
NUL m
1
m
2
p
1
p
2
p
1
p
2
p
1
p
2
A line feed (LF) command causes the printer to print the data in the
line buffer and then to move the print position down by the selected
line spacing. If in the printer menu Auto CR is set at Yes, a carriage
return is executed and the print position is set the the left margin.
With a variable line feed of n/360 inch no carriage return is execut-
ed, despite the settings of the printer menu. If 0 is set for the param-
eter n in this command, no line feed is executed.
If the Alternate Graphics Mode is activated in the menu line feed by
ESC J n is n/180 inch.
The command ESC [ \ EOT NUL m
1
m
2
p
1
p
2
sets the basis for line
spacing is set in increments of 1/n inch for the commands ESC A,
ESC 3 and ESC J.
●
The parameters m
1
and m
2
define the basis for line spacing for
the command ESC A.
m
2
= integer value (n /256)
m
1
= n - (m
2
* 256)
When the printer is turned on the basis for line spacing for ESC
A is set to 1/72 inch, in AGM mode to 1/60 inch.
Line feed