Oki ML3390, User Manual

Page: 222 / 349

Chapter 14: Epson - Standard Function
14-40
Downloadable characters downloaded from system
Character pitch Size
≤
21 point Size > 21 point
1
≤
Pn
≤
71 loaded bitmap loaded bitmap,
double height
72
≤
Pn
≤
127 loaded bitmap, loaded bitmap,
double width double height,
double width
Printing in draft quality
If a proportional font is selected by means of this command (Pn = 1),
the printer replaces the draft quality with the font selected in the
menu in letter quality. If Utility is selected in the menu, the font is
replaced by Courier.
If a fixed character pitch is selected by means of this command,
printing takes place with the selected character pitch and character
sizes stated in the table above for the bitmap character sets.
If no point size is specified in this command (Lp and Hp = 0), the
point size is selected which was previously defined with this com-
mand. If the point size is deleted or not set, printing takes place
with a size of 10.5 point.
The following commands are suppressed if this command is used
for scaling fonts:
ESC W: double-width font
ESC w, US: font in double height
ESC SP: set character separation
SI, ESC SI: condensed font
SO, ESC SO: double-width font for one line
If, by means of this command, a fixed character pitch or proportio-
nal font is selected, the lamp PROP lights on the control panel in the
display field CHARACTER PITCH.