Oki Microline Ml184T+, Handbook, Page: 13 / 117

Setting Up 1 -- 7
8. Put the platen knob shaft in the hole on the right-hand side of the
printer as shown.
9. Try running a self test to make sure your new printer is working cor-
rectly. Insert a piece of computer paper (with sprocket holes) or a sin-
gle sheet of typing paper into the printer as you would insert it in a
typewriter. If you are unfamiliar with typewriters, here is the method:
a. Open the paper release lever by sliding it towards you.
b. After letting the slit of the paper separator pass, the paper as far
as you can into the slots provided by the black paper guides.
Paper guides