manualshive.com logo in svg

Oki Microline Ml184T+, Handbook, Page: 113 / 117

Share
Download
Oki Microline Ml184T+ Handbook Download Page 113

Appendix D: Menu Selections D -- 11

Skip Over Perforation. No (factory default) or Yes. Change to Yes if you
want the printer to advance automatically to the next page when it comes
within one inch of the bottom of the page. If your software has its own
page formatting controls, keep this item set to No to avoid interface.

Slashed Letter O. No (factory default) or Yes. Characters c (155) and ¥
(157) will be set to slashed ø and slashed Ø if you set this item to YES.

Style. Choose Normal (factory default) or Italics.

Time Out Print. Valid or Invalid (factory default). When printing, if the
printer doesn’t receive any data, a line feed, or a form feed signal for awhile,
it will automatically dump out what’s in the print buffer. If your software
spends a long time prossing between feeding portions of data to the printer,
you should change the setting to Invalid to keep your printer from inadvertently
dumping the received data while it’s waiting for more.

Zero Character. Slashed or Unslashed (factory default). The factory default
will cause a slash to appear in zeros to distinguish them from the capital
letter O. To disengage the slashed zero, change this to Unslashed.

Summary of Contents for Microline Ml184T+






















































































































Reviews:

No comments